I've got a gigabyte 7TESM from 2011 and I've got the same issues. I think it just might be the program.

In the system temps plugin, type in “IT87” and then detect. See if that does anything for you per this

Didn’t work for me personally, but it did for a lot of other people with the issue.

i feel like u/spaceinvaderone could make a really good video what to do in this event. Or if there is anything that can be done..

I've seen some people having luck with drivers NCT6775 however all i can get is the auto fan control to show up.

I tried setting fan speed in BIOS but its garbage. :(

Same board, same problem. I've heard maybe a newer version of unraid might help but I've been waiting on that.

Must be MSI boards man I have the same problem with a R5 1600 and MSI B350

i rand Sudo sensors-detect and got

Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes

Found unknown chip with ID 0xd352

Then ran "sensors"

and got:

modprobe nct6775 0xd352^C

and got

k10temp-pci-00c3

Adapter: PCI adapter

Tdie: +47.4°C (high = +70.0°C)

Tctl: +57.4°C

nct6795-isa-0a20

Adapter: ISA adapter

Vcore: +1.42 V (min = +0.00 V, max = +1.74 V)

in1: +1.02 V (min = +0.00 V, max = +0.00 V) ALARM

AVCC: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM

+3.3V: +3.38 V (min = +0.00 V, max = +0.00 V) ALARM

in4: +1.01 V (min = +0.00 V, max = +0.00 V) ALARM

in5: +0.15 V (min = +0.00 V, max = +0.00 V) ALARM

in6: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

3VSB: +3.33 V (min = +0.00 V, max = +0.00 V) ALARM

Vbat: +3.25 V (min = +0.00 V, max = +0.00 V) ALARM

in9: +1.82 V (min = +0.00 V, max = +0.00 V) ALARM

in10: +0.00 V (min = +0.00 V, max = +0.00 V)

in11: +0.74 V (min = +0.00 V, max = +0.00 V) ALARM

in12: +1.16 V (min = +0.00 V, max = +0.00 V) ALARM

in13: +0.68 V (min = +0.00 V, max = +0.00 V) ALARM

in14: +1.51 V (min = +0.00 V, max = +0.00 V) ALARM

fan1: 0 RPM (min = 0 RPM)

fan2: 2428 RPM (min = 0 RPM)

fan3: 1165 RPM (min = 0 RPM)

fan4: 830 RPM (min = 0 RPM)

fan5: 836 RPM (min = 0 RPM)

fan6: 849 RPM (min = 0 RPM)

SYSTIN: +33.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = CPU diode

CPUTIN: +39.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

AUXTIN0: +41.0°C (high = +110.0°C, hyst = +90.0°C) sensor = thermistor

AUXTIN1: -128.0°C sensor = thermistor

AUXTIN2: +40.0°C sensor = thermistor

AUXTIN3: -1.0°C sensor = thermistor

SMBUSMASTER 0: +57.5°C

PCH_CHIP_CPU_MAX_TEMP: +0.0°C

PCH_CHIP_TEMP: +0.0°C

PCH_CPU_TEMP: +0.0°C

intrusion0: ALARM

intrusion1: ALARM

beep_enable: disabled

marry capable imminent zephyr ring office gaze shelter crown expansion -- mass edited with https://redact.dev/